Etura - 60 - F3A

Etura-60


A scaled down version of the Etura, to be flown on 6S
more info will follow soon

Specifications:
Wingspan1650mm
Length1650mm
Weight2800gr
MotorHAcker A50-16S / Dualsky 5050-400kv
SpeedController80Amp / 6S
FlightPack6S 4500mAh
Prop17x10 or 16 x 12

Additional hardware you need to add:

The Etura-60 is now fully ready, including own wings and stabilizer.
There will only be a short-kit, so you will need to buy additional balsa to finish the Etura

Fuselage short kit
All CNC-cut parts for the fuselage, tail and rudder
You will need to add:
- 2 mm balsa sheeting for bottum and top
- balsa 5x8 stringers
- balsa 3x3 stringers

Horizontal Stabilizer kit
All CNC-cut parts to build the horizontal stabilizer
You will need to add:
- 2 mm balsa sheeting
- spruce 7x2
- 4 mm balsa
- tube/socket

Wing kit
All CNC-cut parts to build the wing
You will need to add:
- 2 mm balsa sheeting
- spruce 7x2
- 4 mm balsa

Some pictures below show the wings and stabilizer from a Sebart Mythos. This is a nice replacement fuselage for Wind-S and Mythos.